|
[ Top | Up |
Prev | Next |
Map | Index ]
Analog 5.24: Choosing a logfileThe basic command for selecting a logfile is LOGFILE logfilenameor just to put the logfile name on the command line without any arguments, e.g., analog logfilename. In the Mac version, you can also analyse a particular single logfile by dragging it onto the analog icon. All logfiles must be within your computer's file system (on disk, or at least mounted under Unix, or on a mapped drive under NT) -- analog won't use FTP or HTTP to fetch them from the internet. A - sign or the word stdin is interpreted as standard input: this is useful on Unix systems for constructing pipes. There is also an optional second argument to the LOGFILE command which is explained below. You can have several LOGFILE commands. You can include wildcards in the logfile name (but not necessarily in the directory name: this is system-dependent), and you can use a list of logfiles separated by commas (without spaces). So the following commands would tell analog to read logfile1, c:\logs\logfile2, and all files ending in .log: LOGFILE logfile1,*.log LOGFILE c:\logs\logfile2Or if you were on a Mac, you might use something like LOGFILE "Hard Drive:Internet Applications:Analog:Logs:*"You can also use the special command LOGFILE noneto erase the list of logfiles specified so far. If the name of a logfile in a LOGFILE command doesn't include a directory, it will be looked for wherever analog expects to find logfiles. (This location is built in when the program is compiled.) For example, on Windows it would be in the same folder as the analog executable. But logfile names given on the command line are within the current directory. You can also include the date in the LOGFILE name, by using the following codes. %D date of month %m month name, in English %M month number %y two-digit year %Y four-digit year %H hour %n minute %w day of week, in EnglishSo for example, LOGFILE access_log%Y%M.logwill look for the logfile access_log200109.log, if it's September 2001. The date used is actually the TO date if one was specified, and otherwise the time of the start of the program. So for example, you can look at all of last month's logfiles with the commands TO -00-0131 # to end of last month LOGFILE access_log%Y%M??.log # finds access_log200108??.log in Sep 2001 The LOGFILE commands are cumulative, except that any logfiles on the command line or in configuration files specified on the command line override any in the default configuration file or configuration files loaded from there, and are themselves overridden by any in the mandatory configuration file or configuration files loaded from there. Usually you don't need to worry about this, and it will do what you expect! (Actually I should have said "logfiles or cache files" -- but we'll get on to that later). Analog knows about several different types of logfile. By default it will attempt to see if your logfile is of one of the types it knows about, based on the first line. The types it can usually diagnose are the common log format, the NCSA combined format, referrer log and browser log, the W3 extended log format, the Microsoft IIS format, the Netscape format, the WebSTAR format, the WebSite format and the MacHTTP format. Examples of all these formats are given at the end of this section. If you have debugging on, analog will report what type of logfile it thinks yours is. If your logfile is not in one of the standard formats, you will probably still be OK, because it is possible to tell analog about other formats using a LOGFORMAT command. This is explained in the next section. But most users don't ever need to know about this because they have logfiles in a standard format. So the best thing to do is just to try analysing your logfile and see if analog will understand it. If it does, you don't need to worry about LOGFORMATs. If analog can't understand your logfile, it will warn you that it can't detect the format, or possibly that it found a lot of corrupt lines. There are basically five reasons why this might happen:
There is also an optional second argument to the LOGFILE command, which specifies a prefix to add to all the filenames in that logfile. This is useful if you've got several different servers or virtual hosts, when the same filename may occur on each of the servers. For example, LOGFILE mydomain.log http://www.mydomain.comwould translate a filename /file.html in mydomain.log to http://www.mydomain.com/file.html. Note that because this actually changes the name of the file, any FILEINCLUDE, FILEEXCLUDE or FILEALIAS command will have to refer to the new name, including the prefix. If you are using this command to combine logfiles from several different virtual hosts, then the Virtual Host Report doesn't tell you about the different virtual hosts. The virtual host name has just become part of the filename. So you want to look in the Directory Report instead. (And you will probably want to use the SUBDIR command as well.) If the logfile contains the name of the virtual host on each line, then the argument can contain a %v, and the name of the virtual host will be inserted at that point. If %v is included and the logfile line doesn't have a virtual host, then that line will be marked as corrupt. It is often convenient to store logfiles compressed to save disk space. Analog on the Mac can read logfiles compressed using gzip. And analog on Unix and Win32 can read compressed logfiles provided that you use an UNCOMPRESS command to say how to uncompress them. You need to supply the types of file that you want to uncompress in a comma-separated list, together with the name of a command that will uncompress the files to standard output (rather than to a file). For example, on Unix you might use UNCOMPRESS *.gz,*.Z /usr/bin/gzcatwhereas on Windows NT, you might use UNCOMPRESS *.gz ("c:\Program Files\gzip\gzip" -cd)This would be a suitable command to include in the default configuration file. If analog determines that a logfile which it's uncompressing isn't wanted for the analysis, a "broken pipe" error can be reported. This is produced by the uncompressing command and is out of analog's control, but it's harmless. (NB: There's nothing to stop you using the UNCOMPRESS command for other types of preprocessing, for example DNS resolution.) Logfile formatsHere is a summary of the various logfile formats which analog knows about. To illustrate them, I have used the same (fictional) request as it might be recorded in the different formats.The common logfile format is written by most servers. Its lines look like jay.bird.com - fred [25/Dec/1998:17:45:35 +0000] "GET /~sret1/ HTTP/1.0" 200 1243(except all on one line). Some versions of Microsoft software have a buggy version of this with an extra quote mark before the HTTP like this: jay.bird.com - fred [25/Dec/1998:17:45:35 +0000] "GET /~sret1/ "HTTP/1.0" 200 1243Analog will understand these, but (as with any two formats) it will reject lines if the format changes half way through. The NCSA referrer log looks like [25/Dec/1998:17:45:35] http://www.site.com/ -> /~sret1/and the browser (or agent) log looks like [25/Dec/1998:17:45:35] Mozilla/2.0 (X11; I; HP-UX A.09.05)In the referrer log, the date can be omitted. The NCSA combined log is the same as the common log, except that it has the referrer and browser on the end in quotes, like this: jay.bird.com - fred [25/Dec/1998:17:45:35 +0000] "GET /~sret1/ HTTP/1.0" 200 1243 "http://www.site.com/" "Mozilla/2.0 (X11; I; HP-UX A.09.05)"(except all one line). If you are using the Apache server, you can generate this with the mod_log_config module, using the Apache command LogFormat "%h %l %u %t \"%r\" %s %b \"%{Referer}i\" \"%{User-Agent}i\""It is usually better to use the combined log than separate logs, because it stores more information in less space. The Microsoft IIS logfile looks like 192.64.25.41, -, 25/12/98, 17:45:35, W3SVC1, HOST1, 192.16.225.10, 2178, 303, 1243, 200, 0, GET, /~sret1/, -,(except all on one line; and sometimes with four-digit years). However, the format is extremely badly designed, in that the date follows local conventions: in other words, in North America the above example would have the date 12/25/98 instead. Analog will diagnose which form the logfile is in if possible: but if both the date and the month are at most 12, there is no way to tell which format it is. In this case, it will advise you to use the command LOGFORMAT MICROSOFT-NA for North American date format, or LOGFORMAT MICROSOFT-INT for international date format. In some countries, the date will not be in either of these formats, in which case you need to write your own LOGFORMAT command, based on the examples in the next section. There are also various third-party extensions to the Microsoft format to include, for example, the browser and referrer. But they all do it in different ways, so analog can't automatically diagnose them, and again, you need to write a LOGFORMAT command for them. The WebSite format looks like 12/25/98 17:45:35 jay.bird.com host1 Server fred GET /~sret1/ http://www.site.com/ Mozilla/2.0 (X11; I; HP-UX A.09.05) 200 1243 2178(except all on one line, and with the fields separated by tabs). It suffers from the same problem with ambiguous dates as the IIS logfile (above), so again you might have to use LOGFORMAT WEBSITE-NA or LOGFORMAT WEBSITE-INT, or even have to write your own LOGFORMAT command. The MacHTTP format looks like 12/25/98 17:45:35 OK jay.bird.com /~sret1/ 1243with the fields separated by tabs. The W3 extended log, the Netscape log, and the WebSTAR log can be recognised because they must include at or near the top a line telling analog what format to expect on subsequent lines. (They may also contain later lines changing the format). If the header line is missing, analog won't be able to interpret the subsequent lines and so won't be able to analyse the logfile. In this case, you will have to either replace the missing header or use a LOGFORMAT command to tell analog your format. If analog finds that the header line is corrupt, it will usually tell you what was wrong with it. The most common problem is that you're not allowed the time without the date or vice versa -- in particular, having the date just at the top of the logfile is not sufficient; you must have it on each line. By default, Microsoft servers produce extended logs with the date only at the top. But if the date changes during the logfile, the server doesn't then write a new date line. This means that missing days or corrupt entries can make analog get a day out in either direction, with no way to rescue or even recognise the situation! For this reason analog knows that it can't analyse such logfiles safely, so instead it insists that the date should be on every line. There are some programs on the helper applications page to put the date on each line. If you already have such a logfile you might want to use one of these programs, but they have to assume that the date doesn't change during the logfile, so it would be much safer to tell your server to log the date on every line in future. The extended log is described at http://www.w3.org/TR/WD-logfile.html. Its header line looks like #Fields: date time cs-uriIn the rest of the logfile, the fields can be separated by spaces or tabs. Remember the logfile must contain the date as well as the time on every line -- see above. There is also Microsoft's attempt at the extended format -- unfortunately they didn't read the spec., so they didn't enclose the browser and referrer in quotes, they replaced spaces in the browser name with +'s, and they put the time taken to serve the request in milliseconds instead of seconds. And there is WebSTAR's attempt which is very nearly right except that they erroneously used the CS-HOST field as the client hostname instead of the server hostname. Analog will understand all of these versions. Extended logs always record the time in GMT, so you will probably need to use a LOGTIMEOFFSET command to convert to your local timezone. The WebSTAR format is described at http://www.starnine.com/webstar/docs/ws4manual.3f.html. It has a header line like !!LOG_FORMAT DATE TIME RESULT URL BYTES_SENT HOSTNAMEIn the rest of the logfile, the fields are separated by tabs. The WebSTAR server also records the time in GMT, so again you will probably need to use a LOGTIMEOFFSET command to convert to your local timezone. Some other Mac servers also use the WebSTAR format, or something looking like it. Analog will understand these too. Finally, the Netscape header line looks like format=%Ses->client.ip% [%SYSDATE%] "%Req->reqpb.clf-request%" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length% Go to the analog home page. Stephen Turner 25 June 2002 Need help with analog? Use the analog-help mailing list. |